Emergency firmware recovery using Odin

Emergency firmware recovery using Odin

Emergency firmware recovery using Odin

Emergency firmware recovery using Odin is the 3rd method of flashing recovery and it is the easiest and quick method. You can use this for firmware recovery of any Android version, but we strongly recommend you to try firmware recovery via Kies or smart switch first.

What is Odin?

Odin is a utility software and initially used internally by Samsung to flash a custom recovery firmware image to a Samsung Android device. It is windows only software and do not support any other operating system such as MAC or Linux.

We recommend these two methods for emergency firmware recovery.

  1. Emergency Firmware recovery using Kies ( Android version below 4.1).
  2. Emergency Firmware recovery using Smart switch (Android version above 4.1).

If any of those methods do not work for you or you just want to recover your firmware using Odin then use the steps Given below.

Note: Try this method at your own risk we are not responsible for any software or hardware damage to your phone.

Requirements 

  1. Download and Install latest version of Odin
  2. A PC or Laptop
  3. Device Drivers
  4. Original Samsung USB (Recommended).
  5. Battery Minimum 60%

 

How to Do

  • First of all Download All Samsung recovery file.
  • Boot your phone into Download mode.
  • To boot your phone in download mode Press Vol Up/down +home +power (check screenshot below).

Firmware Recovery

  • Now open Odin on your PC.
  • Connect your Phone to PC.
  • [ID: COM] box will turn yellow if the device connects properly (check screen shot).

kies

odin

  • Don’t Check or Uncheck any box if you are not Expert.
  • Now Click on “Start” Button.
  • Wait for several minutes.
  • ID: COM box will turn green and it will show a message “PASS”.
  • After the successful recovery, your phone will restart automatically.
  • Disconnect your phone from PC.
  • Enjoy.

 

Leave a Comment